J30 V6-2960cc 3.0L DOHC (VG30DE) (1995)
Downshift Switch: Adjustments
Fig. 3 Accelerator cable adjusting nut
Fig. 4 Kickdown switch adjustment
1. Adjust accelerator cable as follows:
a. Tighten adjusting nut, Fig. 3, until throttle drum starts to move, then back off 1 1/2-2 turns and secure with locknut.
2. Adjust kickdown switch as follows:
a. Adjust clearance "C", Fig. , between stopper rubber and end of kickdown switch thread while depressing accelerator pedal fully.
b. Clearance "C", should be 0.012-0.039 inch.