J30t V6-2960cc 3.0L DOHC MFI (VG30DE) (1997)
Brake Fluid: Service and Repair
CAUTION:
^
Always keep fluid level higher than minimum line on reservoir tank.
^
Never reuse drained brake fluid.
^
Be careful not to splash brake fluid on painted areas; it may cause paint damage. If brake fluid is splashed on painted areas, wash it away with
water immediately.
1. Clean inside of reservoir tank, and refill with new brake fluid.
2. Connect a vinyl tube to each air bleeder valve.
3. Drain brake fluid from each air bleeder valve by depressing brake pedal.
4. Refill with new DOT 3 brake fluid until clean brake fluid comes out of each air bleeder valve, then bleed the hydraulic system. See: Brake
Bleeding/Service and Repair