J30t V6-2960cc 3.0L DOHC MFI (VG30DE) (1997)
Spark Plug: Service and Repair
CHANGING SPARK PLUGS
1. Disconnect ignition coil harness connector.
2. Loosen ignition coil fixing bolts and pull out coil from intake manifold collector.
3. Remove spark plugs with suitable spark plug wrench.
NOTE:
a) Do not use a wire brush for cleaning.
b) If plug tip is covered with carbon, spark plug cleaner may be used.
Cleaner air pressure: Less than 588 kPa (85 psi).
Cleaning time: Less than 20 seconds.
c) Checking and adjusting plug gap is not required between change intervals.