J30t V6-2960cc 3.0L DOHC MFI (VG30DE) (1997)
Drive/Propeller Shaft: Testing and Inspection
On Vehicle
VIBRATION
If vibration is present at high speed, check mounting between propeller shaft and companion flange.
-
Make sure alignment marks A and B are located as close to each other as possible. If not, change mounting.
See: Service and Repair
APPEARANCE CHECKING
-
Inspect propeller shaft tube surface for dents or cracks. If damaged, replace propeller shaft assembly.
-
If center bearing is noisy or damaged, replace it.