M35 V6-3.5L (VQ35HR) (2009)
3. Remove mounting screws, and then remove evaporator cover.
4. Remove mounting screws, and then remove foot duct (right).
Removal of Rear Floor Grilles
1. Slide front seats toward vehicle front.
2. Remove mounting clips, and then remove rear floor grilles.
Removal of Rear Floor Ducts
1. Remove center console. Refer to See: Body and Frame/Interior Moulding / Trim/Console/Locations.
2. Remove rear floor duct 1.
3. Remove front seats. Refer to See: Body and Frame/Seats/Service and Repair/Front Seat/Component (driver side) and See: Body and
Frame/Seats/Service and Repair/Front Seat/Passenger Seat Component (passenger side).
4. Peel back floor trim to a point where rear floor duct is visible.