M35x AWD V6-3.5L (VQ35DE) (2007)
9. Remove the following parts after removing bumper fascia.
-
Front grille
-
License plate bracket
-
Front bumper grille (LH/RH)
-
Fog lamp assembly (LH/RH).
10. Remove bumper side bracket mounting clips, and remove bumper side bracket (LH/RH).
11. Remove bumper energy absorber.
12. Remove bumper reinforcement mounting nuts, and remove bumper reinforcement with power tool.
INSTALLATION
Install in the reverse order of removal.
Removal and Installation of Front Bumper Grille
CAUTION: Apply protection tape around outer circumference of front bumper grille (bumper fascia side).
REMOVAL
1. Disengage plastic pawls from vehicle inside using a plastic spatula.
2. While pulling the grille foreward, unlock the turn fastener around right end of the grille using a screwdriver.