M35x AWD V6-3.5L (VQ35DE) (2007)
2. Drive out valve guide with a press [under a 20 kN (2 ton, 2.2 US ton, 2.0 Imp ton) pressure] or a hammer and the valve guide drift (commercial
service tool).
WARNING: Cylinder head contains heat. When working, wear protective equipment to avoid getting burned.
3. Using the valve guide reamer (commercial service tool), ream cylinder head valve guide hole.
Valve guide hole diameter (for service parts):
Intake and exhaust: 10.175 - 10.196 mm (0.4006 - 0.4014 in)
4. Heat cylinder head to 110 to 130°C (230 to 266°F) by soaking in heated oil.
5. Using the valve guide drift (commercial service tool), press valve guide from camshaft side to the dimensions as in the figure.
Projection "L"
Intake and exhaust: 12.6 - 12.8 mm (0.496 - 0.504 in)
WARNING: Cylinder head contains heat. When working, wear protective equipment to avoid getting burned.