M35x AWD V6-3.5L (VQ35DE) (2007)
/Page-619001.png)
Intake Manifold: Specifications
Tightening Torques & Sequences
Intake Manifold
If stud bolts were removed, install them and tighten to the specified torque below.
Torque ................................................................................................................................................................................... 10.8 Nm (1.1 kg-m, 8 ft-lb)
Tighten all mounting bolts and nuts to the specified torque in two or more steps in numerical order shown in the figure.
1st step ................................................................................................................................................................................... 7.4 Nm (0.75 kg-m, 5 ft-lb)
2nd step and after ................................................................................................................................................................. 29.0 Nm (3.0 kg-m, 21 ft-lb)
