M35x AWD V6-3.5L (VQ35DE) (2007)
38. Use a scraper to remove all traces of liquid gasket from front and rear timing chain cases, and opposite mating surfaces.
^
Remove old liquid gasket from the bolt hole and thread.
39. Use a scraper to remove all traces of liquid gasket from water pump cover, chain tensioner cover and intake valve timing control covers.
INSPECTION AFTER REMOVAL
Timing Chain
Check for cracks and any excessive wear at link plates and roller links of timing chain. Replace timing chain as necessary.
INSTALLATION
NOTE: The below figure shows the relationship between the mating mark on each timing chain and that on the corresponding sprocket, with the
components installed.