M35x AWD V6-35L (VQ35DE) (2007) Engine Timing Chain | Service and Repair | Page 2404
1. Install timing chain tensioners (secondary) to cylinder head as follows if removed.
a. Install timing chain tensioners (secondary) with a stopper pin attached and new O-rings.
b. Install camshaft brackets (No. 1).
2. Install rear timing chain case as follows:
a. Install new O-rings onto cylinder block.
b. Install new O-rings to cylinder head.
c. Apply liquid gasket with the tube presser [SST: WS39930000 ( - )] to rear timing chain case back side as shown in the figure.
Use Genuine RTV Silicone Sealant or equivalent. Refer to GI-47, "RECOMMENDED CHEMICAL PRODUCTS AND SEALANTS". See:
Service and Repair
CAUTION:
^
For "A" in the figure, completely wipe out liquid gasket extended on a portion touching at engine coolant.
^
Apply liquid gasket on installation position of water pump and cylinder head very completely.