M35x AWD V6-3.5L (VQ35DE) (2007)
Step Two: Preparation for Reprogramming ECM
1.
Connect a battery charger to the vehicle's battery. Set the charger to a low charge rate (trickle charge).
CAUTION:
For number 2 below and number 3, DO NOT connect the CONSULT-II A/C Power Supply.
2.
Press [SUB MODE] (see Figure C) then:
a.
From the listed items find and select [BATTERY CHARGE].
3.
Check the CONSULT-II's Charger Input reading (see Figure D).