M35x AWD V6-3.5L (VQ35DE) (2007)
Engine Control Module: Service and Repair
Procedure After Replacing ECM
Procedure After Replacing ECM
When replacing ECM, the following procedure must be performed.
1. Perform initialization of IVIS (NATS) system and registration of all IVIS (NATS) ignition key IDs. Refer to BL-248, "ECM Re-Communicating
Function". See: Body and Frame/Locks/Power Locks/Testing and Inspection
2. Perform EC-85, "VIN Registration". See: Computers and Control Systems/Testing and Inspection/Programming and Relearning/VIN Registration
3. Perform EC-86, "Accelerator Pedal Released Position Learning". See: Computers and Control Systems/Testing and Inspection/Programming and
Relearning/Accelerator Pedal Released Position Learning
4. Perform EC-86, "Throttle Valve Closed Position Learning". See: Computers and Control Systems/Testing and Inspection/Programming and
Relearning/Throttle Valve Closed Position Learning
5. Perform EC-86, "Idle Air Volume Learning". See: Computers and Control Systems/Testing and Inspection/Programming and Relearning/Idle Air
Volume Learning