M35x AWD V6-3.5L (VQ35DE) (2007)
Side Air Bag: Service and Repair
SIDE CURTAIN AIR BAG MODULE
Exploded View SRS-47
Removal and Installation
REMOVAL
CAUTION:
-
Before servicing, turn ignition switch OFF, disconnect both battery terminal and wait at least 3 minutes.
-
Do not use air tools or electric tools for servicing.
-
Leave the curtain air bag module with air bag deployment side facing upward.
-
Do not make an impact to the air bag module by dropping etc. Replace the air bag module if it has been dropped or sustained an impact.
1. Remove the curtain air bag module.
-
Remove the headlining.
-
Remove the side curtain air bag module connector.
NOTE:
-
For installing / removing side curtain air bag module connector, insert thin screwdriver wrapped in tape into notch, lift lock and remove
connector.
-
Install connector with lock raised, and push lock into connector.
-
After installing the connector, make sure that the lock is pushed securely into it.
-
Remove the curtain air bag module fixing bolts, then remove the ground bolt.
Fixing bolt (<-) : 10.8 N.m (1.1 kg-m, 8 ft-lb)
Ground bolt A : 10.8 N.m (1.1 kg-m, 8 ft-lb)