M35x AWD V6-3.5L (VQ35DE) (2007)
Aiming Adjustment
CAUTION:
-
Complete all necessary work for laser beam adjustment until the adjustment completes as shown in the procedure. If the procedure does
not complete, the ICC system is inoperable.
-
If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending
on control unit which carry out CAN communication.
1. Connect CONSULT-II and CONSULT-II CONVERTER, and then touch "ICC" on "SELECT SYSTEM" screen. If "ICC" is not indicated, go to
GI-39, "CONSULT-II Data Link Connector (DLC) Circuit". See: Testing and Inspection
2. Touch "WORK SUPPORT".
3. Touch "LASER BEAM ADJUST".
4. Touch "START".