M35x AWD V6-3.5L (VQ35DE) (2007)
Headlamp Alignment Sensor: Service and Repair
Removal and Installation of Height Sensor
REMOVAL
1. Disconnect height sensor connector.
2. Remove height sensor link bracket mounting nut. (rear stabilizer side)
CAUTION: Never remove from the installation nut of height sensor link bracket (height sensor link side).
Exploded View LT-193
3. Remove bolts, and remove height sensor.
INSTALLATION
Installation is the reverse order of removal.
CAUTION: Tighten the bracket while pushing onto rear stabilizer when installing the installation nut of height sensor link bracket (stabilizer
side).
NOTE: Adjust levelizer when replacing height sensor. For details, refer to LT-152, "WORK SUPPORT (LEVELIZER ADJUSTMENT)". See:
Lighting and Horns/Headlamp/Headlamp Alignment Control Module/Testing and Inspection/Scan Tool Testing and Procedures/Work Support
(Levelizer Adjustment)