M35x AWD V6-3.5L (VQ35DE) (2007)
6. Install A/T fluid temperature sensor 2 (with bracket) in control valve with TCM. Tighten A/T fluid temperature sensor 2 bolt to the specified
torque. Refer to Exploded View AT-236.
CAUTION: Adjust bolt hole of bracket to bolt hole of control valve with TCM.
7. Install control valve with TCM in transmission case.
CAUTION:
^
Make sure that turbine revolution sensor securely installs turbine revolution sensor hole.
^
Hang down revolution sensor harness toward outside so as not to disturb installation of control valve with TCM.
^
Adjust A/T assembly harness connector of control valve with TCM to terminal hole of transmission case.
^
Assemble it so that manual valve cutout is engaged with manual plate projection.