M35x AWD V6-3.5L (VQ35DE) (2007)
/Page-1175011.png)
iii.
Tighten oil pan mounting bolts to the specified torque in numerical order shown in the figure after temporarily tightening them. Tighten oil
pan mounting bolts to the specified torque. Refer to Exploded View AT-236.
CAUTION: Do not reuse oil pan mounting bolts.
b.
VK45DE models
i.
Install oil pan gasket to oil pan.
CAUTION:
^
Do not reuse oil pan gasket.
^
Install it in the direction to align hole positions.
^
Complete remove all moisture, oil and old gasket, etc. from oil pan gasket mounting surface.
ii.
Install oil pan (3) (with oil pan gasket), clips (1) and brackets (2) to transmission case.
<-: Front
<=: Bolt (22)
CAUTION:
^
Install it so that drain plug comes to the position as shown in the figure.
^
Be careful not to pinch harnesses.
^
Completely remove all moisture, oil and old gasket, etc. from oil pan mounting surface.
^
Be careful with installation direction of brackets (2).
iii.
Tighten oil pan mounting bolts to the specified torque in numerical order shown in the figure after temporarily tightening them. Tighten oil
pan mounting bolts to the specified torque. Refer to Exploded View AT-236.
CAUTION: Do not reuse oil pan mounting bolts.
16. Install drain plug to oil pan. Tighten drain plug to the specified torque. Refer to Exploded View AT-236.
