M35x AWD V6-3.5L (VQ35DE) (2007)
Drive/Propeller Shaft: Removal and Replacement
Front Propeller Shaft
FRONT PROPELLER SHAFT
Exploded View PR-4
Removal and Installation
REMOVAL
1. Remove engine undercover with a power tool.
2. If necessary, remove heat bracket.
3. Remove the three way catalyst (right bank) with a power tool.
4. Put matching marks onto propeller shaft flange yoke and final drive companion flange.
CAUTION: For matching marks, use paint. Do not damage propeller shaft flange and companion flange.
5. Remove the propeller shaft fixing bolts.
6. Remove propeller shaft from the front final drive and transfer.
INSPECTION