M35x AWD V6-3.5L (VQ35DE) (2007)
4. Remove the fixing bolt and pull up the outer corner cover (1) to remove outward.
5. Remove the rear door sash fixing nut and the door side TORX bolt (T30) (1).
6. Remove the harness clip and pull out the rear door sash from the door panel.
7. Operate the power window switch to raise/lower the door window until the glass mounting bolts can be seen.
8. Remove the glass mounting bolts.
9. Remove the door glass from the inside of door panel.
10. Remove the door glass run.
Installation
Install in the reverse order of removal.
REGULATOR ASSEMBLY
Removal
1. Remove the rear door finisher.