M35x AWD V6-3.5L (VQ35HR) (2010)
4. Tighten bolts in two steps separately in numerical order as shown in the figure.
White arrow: Engine front
1st step: 2.0 Nm (0.2 kg-m, 18 in-lb)
2nd step: 8.3 Nm (0.85 kg-m, 73 in-lb)
5. Install oil filler cap to rocker cover (bank 2), if removed.
6. Install new O-ring and PCV valve to rocker cover (bank 1), if removed.
7. Install PCV hose.
-
Insert PCV hose by 25 to 30 mm (0.98 to 1.18 in) from connector end.
-
When installing, be careful not to twist or come in contact with other parts.
-
Install PCV hose between bank 1 and bank 2 rocker covers with its identification paint facing upward
[rocker cover (bank 1) side]. Refer to component figure in See: Component.
8. Install in the reverse order of removal after this step.