M35x AWD V6-3.5L (VQ35HR) (2010)
Air Filter Element: Service and Repair
Removal and Installation
AIR CLEANER AND AIR DUCT
Removal and Installation
REMOVAL
NOTE:
Mass air flow sensor is removable under the car-mounted condition.
1. Remove engine room cover (RH and LH). See: Access Cover/Service and Repair/Component.
2. Remove air duct (inlet).
3. Disconnect mass air flow sensor harness connector.
4. Disconnect PCV hose.
5. Remove air cleaner case with mass air flow sensor assembly and air duct assembly disconnecting their joints.
-
Add marks if necessary for easier installation.
6. Remove mass air flow sensor from air cleaner case if necessary.
CAUTION:
Handle the mass air flow sensor with care.
-
Never shock the mass air flow sensor.
-
Never disassemble the mass air flow sensor.
-
Never touch the sensor of the mass air flow sensor.
INSTALLATION
Note the following, and install in the reverse order of removal.
-
Align marks. Attach each joint. Screw clamps firmly.