M35x AWD V6-3.5L (VQ35HR) (2010)
Backup Light Bulb: Service and Repair
BACK-UP LAMP
Bulb Replacement
CAUTION:
-
Disconnect the battery negative terminal or remove the fuse.
-
Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Never touch bulb by hand while it is lit or right after being turned off.
-
Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When
replacing bulb, be sure to replace it with new one.
1. Remove trunk lid finisher inner. .
2. Turn bulb socket (1) counterclockwise and unlock it.
3. Remove bulb (2) from its socket.
Back-up lamp: 12V - 16W