Infiniti Workshop Service and Repair Manuals

Engine Control Module: Testing and Inspection
Additional Service When Replacing Control Unit

Description

INSPECTION AND ADJUSTMENT

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description

When replacing ECM, the following procedure must be performed.

Special Repair Requirement

INSPECTION AND ADJUSTMENT

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement

1.PERFORM INITIALIZATION OF IVIS (NATS) SYSTEM AND REGISTRATION OF ALL IVIS (NATS) IGNITION KEY IDS
 See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Service and Repair.
- GO TO 2.
2.PERFORM VIN REGISTRATION
 See: VIN Registration/Special Repair Requirement.
- GO TO 3.
3.PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING
 See: Fuel Delivery and Air Induction/Testing and Inspection/Programming and Relearning/Accelerator Pedal Released Position Learning/Special
Repair Requirement.
- GO TO 4.
4.PERFORM THROTTLE VALVE CLOSED POSITION LEARNING
 See: Testing and Inspection/Programming and Relearning/Throttle Valve Closed Position Learning/Special Repair Requirement.
- GO TO 5.
5.PERFORM IDLE AIR VOLUME LEARNING
 See: Fuel Delivery and Air Induction/Testing and Inspection/Programming and Relearning/Idle Air Volume Learning/Special Repair Requirement.
- GO TO 6.
6.PERFORM EXHAUST VALVE TIMING CONTROL LEARNING
 See: Testing and Inspection/Programming and Relearning/Exhaust Valve Timing Control Learning/Special Repair Requirement.
- END