M35x AWD V6-3.5L (VQ35HR) (2010)
Steering Angle Sensor: Service and Repair
Removal and Installation
Without Mobile Entertainment System
STEERING ANGLE SENSOR
Removal and Installation
REMOVAL
1. Remove combination switch. See: Lighting and Horns/Sensors and Switches - Lighting and Horns/Combination Switch/Service and Repair.
2. Remove screws (A) and remove connector mount screw (B).
3. Remove steering angle sensor (1) from combination switch (2).
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Insert the projection area, and install steering wheel angle sensor while fitting adjusting the triangle marks (Larger mark should be
upward.).
With Mobile Entertainment System
STEERING ANGLE SENSOR
Removal and Installation
REMOVAL
1. Remove combination switch. See: Lighting and Horns/Sensors and Switches - Lighting and Horns/Combination Switch/Service and Repair.
2. Remove screws (A) and remove connector mount screw (B).
3. Remove steering angle sensor (1) from combination switch (2).
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Insert the projection area, and install steering wheel angle sensor while fitting adjusting the triangle marks (Larger mark should be
upward.).
VDC/TCS/ABS