M37 V6-3.7L (VQ37VHR) (2011)
1. Restart the C-III session by selecting the Home icon in the upper left corner of the screen (see Figure 3).
2. Navigate C-III to the reprogramming screen shown in Figure 3 example above.
NOTE:
^ Do not use the "Reprogramming / Programming" selection.
^ Select the Model and Model Year, and then navigate to Direct Diagnosis > Reprogramming.
^ TCM initialization is not needed for 7 Speed A/T reprogramming.
3. On your C-III screen look for a Transmission Part Number in the Part Number column (see Figure 3 example).
^ If there is no Transmission Part Number listed, this bulletin does not apply.
^ If a Transmission Part Number is listed, write it on the Repair Order, and then go to Step 4.
4. Compare the P/N you wrote down to the numbers in the Current TCM P/N column in Table D above.
^ If there is a match, continue with the reprogramming procedure.
^ If there is not a match, skip to "BATTERY TESTING AND FINAL PROCESSES" below.