M37 V6-3.7L (VQ37VHR) (2011)
23. When the screen in Figure 14 appears 4WAS front control unit reprogramming is complete.
NOTE:
If you can't print the above screen:
a. Select the Print icon.
b. Select Save.
c. Select OK.
A copy of the screen is now saved in the Toughbook(R) PC.
NOTE:
If you saved a copy of the screen in Figure 15 and need to print it at a later date you can find it in the following file location:
a. At the bottom left corner of the computer screen click on Start.