M37 V6-37L (VQ37VHR) Automatic Transmission/Transaxle Control Module Bulletin
2. Navigate C-III to the reprogramming screen shown in Figure 1 example above.
NOTE:
^ Do not use the "Reprogramming / Programming" selection.
^ Select the Model and Model Year, and then navigate to Direct Diagnosis > Reprogramming.
^ TCM initialization is not needed for 7 Speed A/T reprogramming.
3. On your C-III screen, look for a Transmission Part Number in the Part Number column (see Figure 1 example).
^ If there is no Transmission Part Number listed, this bulletin does not apply.
^ If a Transmission Part Number is listed, write it on the Repair Order and then go to Step 4.