M37 V6-3.7L (VQ37VHR) (2011)
2. Navigate C-III to the ECM Reprogramming screen shown in Figure 3.
^ Use the "Reprogramming / Programming" selection.
^ Do not use Direct Diagnosis > Reprogramming.
3. On your C-III screen, look at the Part Number column (see Figure 3 example):
^ If this column is blank (no part number listed), this reprogramming does not apply.
NOTE:
The ECM reprogramming used for this bulletin is also used for another issue and may have already been performed on your vehicle.
^ If a Part Number is listed, write it on the Repair Order.