M45 V8-4.5L (VK45DE) (2006)
1.
First pull the front end of the Seat Cushion UP to release the two Front Attachment Hooks (see Figure 2).
NOTE:
There is no lock-lever release required (just pull UP on the front end of the cushion to release the hooks).
2.
Then pull the seat cushion forward (towards the front of the vehicle) to release the Rear Attachment Hook (see Figure 2).
Seat Back
The seat back has three locking points one at the lower part of the seat back and two at approximately the mid-point of the seat back. To remove the seat
back do the following: