M45 V8-4.5L (VK45DE) (2006)
Front Fender Liner: Service and Repair
FENDER PROTECTOR
Removal and Installation
REMOVAL
1. Remove rear end screw of fender protector (rear).
2. Remove clips of fender protector (rear).
3. Remove plastic clamp from wheelhouse arches, and then remove fender protector (rear) from wheel house.
4. Remove screws of front under cover.
5. Remove front end screw of fender protector (front).
6. Remove front end clip of fender protector (front).
7. Remove fender protector (front) from wheel house.
INSTALLATION
Install in the reverse order of removal.
REAR WHEEL HOUSE PROTECTOR
REMOVAL AND INSTALLATION
REMOVAL