M45 V8-4.5L (VK45DE) (2006)
Seat Back: Service and Repair
Disassembly and Assembly
SEATBACK Disassembly
1. Remove seatback trim and seatback pad.
NOTE: Seatback trim and seatback pad can be removed without removing seatback assembly from seat body.
-
Remove the retainer from the lower side of seatback board.
-
Disconnect the clips and pawls, and then remove the seatback board.
*: Pawl
*: Clip
-
Remove the seatback hinge mounting bolts.
-
Remove the retainer on the back side of the seatback.
-
Remove the seat speaker grills. (Applied 5.1 ch BOSE studio surround(R) system models.)
-
Remove the headrest holder.
CAUTION: Before installing headrest holder, check its orientation (front/rear and right/left).
-
Disconnect the clip, and then remove the reclining device cover.