M45 V8-4.5L (VK45DE) (2006)
/Page-1304001.png)
Brake Pedal Assy: Testing and Inspection
BRAKE PEDAL
Inspection and Adjustment
Play and clearance inspection between brake pedal and floor panel with pedal depressed.
^
Check brake pedal play.
^
Check brake pedal height from dash lower panel (1).
^
Adjust height referring to the following specifications.
ADJUSTMENT
1. Loosen stop lamp switch and brake switch by turning it counterclockwise by 45°.
2. Loosen lock nut (A) on the input rod to rotate input rod for adjusting brake pedal height to the specified one, and tighten lock nut (A).
CAUTION: Make sure the threaded end of input rod stays inside clevis.
