M45 V8-4.5L (VK45DE) (2006)
Components
NOTE: Do not remove torque member, pads, shims, shim covers, and pad retainers when disassembling and assembling cylinder body assembly
DISASSEMBLY
1. Remove sliding pin bolt, and then remove cylinder body from torque member.
CAUTION: Do not drop pads, shims, shim cover and pad retainers from torque member.
2. Remove sliding pins and sliding pin boots from torque member.
3. Place a wooden block as shown in the figure, and blow air from union bolt mounting hole to remove pistons and piston boots.
CAUTION: Do not get fingers caught in the pistons.