M45 V8-4.5L (VK45DE) (2006)
7.
Roll down the driver's window part way exit the vehicle close the door and hang the CONSULT-II unit on the outside of the window.
8.
Continue with Section 3.
Section 3: Check / adjust the vehicle's battery voltage / CONSULT-II "Charger Input" voltage
1.
Press [SUB MODE] then select [BATTERY CHARGE].
CAUTION:
^
DO NOT connect the CONSULT-II AC power supply for Steps 2, and 3 in this section.
2.
Check the CONSULT-II's Charger Input reading (see Figure 19).