M45 V8-4.5L (VK45DE) (2006)
3.
Remove the 2 bolts shown in Figure 2 and then remove the air intake duct.
4.
Locate the radiator cooling fan control module (see Figure 3).
^
Look between the front of the engine and the radiator cooling fans.
5.
Disconnect the 3 harness connecters form the cooling fan control module (see Figure 3).
6.
Remove the 2 mounting bolts shown in Figure 3 and then remove the cooling fan control module.
7.
Install the new cooling fan control module:
^
Install the 2 bolts - torque to 4.4 N-m (0.45 kg-m, 39 in-lb).
^
Reconnect the harness connecters.