M45 V8-4.5L (VK45DE) (2006)
^
Remove connecting rod bearing cap and bearing, and using scale on plastigage bag, measure the plastigage width.
NOTE: The procedure when the measured value exceeds the limit is same as that described in the Method by Calculation.
CRUSH HEIGHT OF CONNECTING ROD BEARING
^
When connecting rod bearing cap is removed after being tightened to the specified torque with connecting rod bearings installed, the tip end of
bearing must protrude.
Standard: There must be crush height.
^
If the standard is not met, replace connecting rod bearings.
CONNECTING ROD BEARING
CONNECTING ROD BEARING
Undersize
Undersize
Connecting Rod Bearing Oil Clearance
Connecting Rod Bearing Oil Clearance