M45 V8-4.5L (VK45DE) (2006)
^
Install front oil seal so that each seal lip is oriented as shown in the figure.
^
Using front oil seal drift, press fit until the height of front oil seal is level with the mounting surface.
Front oil seal drift
Outer diameter: 56 mm (2.20 inch)
Inner diameter: 49 mm (1.93 inch)
^
Make sure the garter spring is in position and seal lips not inverted.
CAUTION:
^
Be careful not to damage front cover and oil pump drive spacer.
^
Press fit straight and avoid causing burrs or tilting oil seal.
3. Install in the reverse order of removal.