M45 V8-4.5L (VK45DE) (2006)
Available Adjusting Shims
Shims are available in 64 sizes from 2.32 mm (0.0913 inch) to 2.95 mm (0.1161 inch) in steps of 0.01 mm (0.0004 inch).
^
Thickness of new adjusting shim can be identified by stamp marks on the reverse side (inside the cylinder).
8. Install new adjusting shim using suitable tool.
^
Install with the surface on which the thickness is stamped facing down.
9. Remove lifter stopper as follows:
a. Except exhaust side of No. 7 and 8 cylinder;