M45 V8-4.5L (VK45DE) (2006)
1.
Install the standard 8 MB (orange) Reprogramming Card into CONSULT-II.
^
* To prevent card damage:
Ignition must be OFF.
CONSULT-II must be OFF.*
^
Use slot A-top slot.
2.
Connect the AC power supply to CONSULT-II.
3.
Connect CONSULT-II to the ASIST PC with the special Ethernet cable (P/N 02002554 is printed on the cable).
a.
Connect one end to CONSULT-II at the "PC port".
b.
Connect the other end to the ASIST PC at the "Ethernet card" connection port.
4.
Confirm the CONSULT-II date and time are correctly set as follows:
(This is necessary to provide a valid print-out for warranty claims.)
a.
With the 8MB (orange) Reprogramming card in slot A turn ON CONSULT-II.
b.
Touch [SUB MODE].