M45 V8-4.5L (VK45DE) (2006)
c.
Touch [SET DATE] (see Figure 2).
^
If the date is not correct touch the [MONTH], [DAY] or [YEAR] as needed. Then adjust it by using arrow keys. Once done press
[SAVE] press [BACK] and go to step D.
^
If the date is OK press [BACK] and go to step d.
d.
Touch [SET TIME] (see Figure 2).
^
If time is not correct touch the [HOUR], [MINUTE] or [AM/PM] as needed. Then adjust it by using arrow keys. After you are done
press [SAVE] press [BACK] and go to step 5.
^
If time is OK press [BACK] turn CONSULT-II OFF and go to step 5.
IMPORTANT NOTE
^
If your ASIST PC has already been set up to perform ECU reprogramming proceed to step 5.
^
If you are unsure whether your ASIST PC has already been set up for ECU reprogramming, look in ASIST, under "CONSULT Utilities" -
"CONSULT-II Info" - "INFINITI" - "ECU Reprogramming". This will give you instructions for setting the Ethernet (IP) Address of the
ASIST PC and CONSULT-II. You will need to do this before performing ECU reprogramming.
DOWNLOAD (TRANSFER) DATA FROM ASIST INTO CONSULT-II (8 MB Orange Card)