Campaign P6207 - Cruise Control Programming - Technical Service Bulletins
^
CONSULT-II is OFF.
^
The 8 MB (orange) Reprogramming Card is inserted into CONSULT-II (see Figure 8).
^
The A/C Power Adapter is securely connected to CONSULT-II.
^
The Ethernet Cable is securely connected to CONSULT-II and the PC port.
b.
Turn CONSULT-II ON as shown steps 2 and 3 of Figure 8.
c.
Select [Transfer Files via LAN].
NOTE:
If you accidentally choose a menu option other than "Transfer Files via LAN"; turn CONSULT-II OFF and then back ON as shown in Figure
8.
d.
Set the CONSULT-II unit down for now and go to your ASIST PC.