M45 V8-4.5L (VK45DE) (2006)
/Page-402005.png)
12. Straighten terminal clips to free revolution sensor harness.
13. Remove revolution sensor from A/T case.
CAUTION:
^
Do not subject it to impact by dropping or hitting it.
^
Do not disassemble.
^
Do not allow metal filings, etc., to get on the sensor's front edge magnetic area.
^
Do not place in an area affected by magnetism.
Installation
CAUTION: After completing installation, check A/T fluid leakage, A/T fluid level and A/T position.
1. Install revolution sensor in A/T case. Tighten a necessary bolt for revolution sensor with specified torque.
CAUTION:
^
Do not subject it to impact by dropping or hitting it.
^
Do not disassemble.
^
Do not allow metal filings, etc., to get on the sensor's front edge magnetic area.
^
Do not place in an area affected by magnetism.
