M45 V8-4.5L (VK45DE) (2006)
Alternator: Service and Repair
Removal and Installation
CHARGING SYSTEM
VK45DE ENGINE MODELS
Removal
1. Disconnect the battery cable from the negative terminal.
2. Remove engine front undercover, using power tools.
3. Remove "B" terminal nut (1).
4. Disconnect alternator connector (2).
5. Remove alternator ground harness mounting bolt (3).
6. Remove the harness bracket bolts (A).
7. Remove air intake duct. Refer to "AIR CLEANER AND AIR DUCT".
8. Remove alternator, water pump and A/C compressor belt. Refer to "DRIVE BELTS".