infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Tires - Mounting Information/Precautions|Page 8454 > < Tires - Mounting Information/Precautions|Page 8452
Page 1
background image

Wheels: Service and Repair

Balancing Wheels (Bonding Weight Type) 

REMOVAL 

1. Using releasing agent, remove double-faced adhesive tape from the road wheel.

CAUTION:  
^

Be careful not to scratch the road wheel during removal.

^

After removing double-faced adhesive tape, wipe clean traces of releasing agent from the road wheel.

WHEEL BALANCE ADJUSTMENT 

If a tire balance machine has adhesion balance weight mode settings and drive-in weight mode setting, select and adjust a drive-in weight mode
suitable for road wheels.
1. Set road wheel on wheel balancer using the center hole as a guide. Start the tire balance machine.
2. When inner and outer unbalance values are shown on the tire balance machine indicator, multiply outer unbalance value by 5/3 to determine

balance weight that should be used. Select the outer balance weight with a value closest to the calculated value above and install it to the
designated outer position of, or at the designated angle in relation to the road wheel.

CAUTION:  
^

Do not install the inner balance weight before installing the outer balance weight.

^

Before installing the balance weight, be sure to clean the mating surface of the road wheel.

Indicated imbalance value x 5/3 = balance weight to be installed. 
23 grams (0.81 ounces) x 5/3 = 38.33 grams (1.35 ounces) = 40g (1.41 ounces) balance weight (closer to calculated balance weight value)
Note that balance weight value must be closer to the calculated balance weight value. 
37.4 = 35 grams (1.23 ounces) 37.5 = 40 grams (1.41 ounces)

a. Install balance weight in the position shown in the figure.
b. When installing balance weight to road wheels, set it into the grooved area on the inner wall of the road wheel as shown in the figure so that

the balance weight center is aligned with the wheel balancer indication position (angle).

CAUTION:  
^

Always use genuine NISSAN adhesion balance weights.

^

Balance weights are unusable; always replace with new ones.

^

Do not install more than three sheets of balance weight.

Tires - Mounting Information/Precautions|Page 8454 > < Tires - Mounting Information/Precautions|Page 8452