M45 V8-4.5L (VK45DE) (2006)
Windshield Washer Reservoir: Service and Repair
Removal and Installation of Washer Tank
<- : Vehicle front
REMOVAL
1. Remove engine room cover (RH).
2. Remove clip (A) and pull washer tank inlet (1) out of washer tank.
3. Remove front bumper.
4. Disconnect washer pump connector and wash fluid level sensor connector.
5. Remove washer tank mounting nuts (A) and remove screw (B).
6. Remove washer tube, and remove washer tank (1) from vehicle.
INSTALLATION
Note the following, and installation is the reverse order of removal.
CAUTION:
After installation, add water up to the upper level of washer tank inlet, and check for water leaks.
Washer tank mounting nuts: 4.5 N.m (0.46 kg-m, 40 in-lb)
Washer tank mounting screw: 4.5 N.m (0.46 kg-m, 40 in-lb)