M45x AWD V8-4.5L (VK45DE) (2008)
Rear Bumper: Service and Repair
Sports Type
REAR BUMPER
SPORTS TYPE : Removal and Installation
CAUTION: Bumper fascia is made of resin. Do not apply strong force to it, and be careful to prevent contact with oil.
REMOVAL
1. Fully open trunk lid assembly.
2. Remove rear combination lamp (LH/RH).
3. Remove clips (A) located under rear combination lamp (LH/RH).
4. Remove clips (A) of rear bumper fascia under side.
5. Remove screws (B) of rear bumper fascia under side.
6. Remove clips (A) of rear wheel house protector rear end (LH/ RH).