M45x AWD V8-4.5L (VK45DE) (2008)
-
Cover center console finisher upper surface with a shop cloth so as to prevent it from being damaged.
-
Set A/T selector lever to D position, and make a space to remove front end of headlining right side.
-
Do not bend headlining when removing.
18. Remove the following parts after removing headlining.
-
Personal lamp (LH/RH).
-
Map lamp assembly (without LDW system).
-
Assistance grip assembly.
-
Roof harness assembly.
-
Antenna feeder assembly
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
Install headlining assembly after inserting clips to clip holder of headlining rear end.
-
Do not bend headlining when installing.
-
When installing the map lamp assembly (new unit) or assist grip assembly (new unit), use tools like drafter or deep socket A to eliminate
the gap between the headlining and the above new units while the push on nuts (1).