M45x AWD V8-4.5L (VK45DE) (2008)
1. Loosen stop lamp switch and brake switch by turning it counterclockwise by 45°.
2. Loosen lock nut (A) on the input rod to rotate input rod for adjusting brake pedal height to the specified one, and tighten lock nut (A).
CAUTION: Make sure the threaded end of input rod stays inside clevis.
3. With the pedal pulled and held by hand, press stop lamp switch and brake switch until its threaded end contacts stopper.
4. With the threaded end of the stop lamp switch and brake switch contacting the bracket, rotate the switch clockwise by 45° to secure.
CAUTION: Make sure that the clearance "C" between bracket and end of stop lamp switch and brake switch is within the standard.
5. Check pedal play.
CAUTION: Make sure that stop lamps goes off when pedal is released.
6. Start engine to check brake pedal depression height when depressed. Refer to "Inspection and Adjustment".