M45x AWD V8-4.5L (VK45DE) (2008)
EM-175 Component (Part 2)
Intake Manifold (Lower)
Tighten in numerical order as shown in the figure.
<---: Engine front
There are two types of mounting bolts. Refer to the following for locating bolts.
M8 × 90 mm (3.54 in) .................................................................................................................................................................................................. 7, 8
M8 × 35 mm (1.38 in) ............................................................................................................................................................................. Except the above
Intake Manifold (Upper)
Tighten in numerical order as shown in the figure.
<---: Engine front