M45x AWD V8-4.5L (VK45DE) (2008)
Backup Lamp: Service and Repair
Removal and Installation
LT-209 Exploded View
REMOVAL
CAUTION: Disconnect the battery negative terminal or remove the fuse.
1. Remove trunk lid finisher inner.
2. Disconnect back up lamp and trunk lid request switch connector.
3. Remove trunk lid finisher outer.
4. Remove screws and clip, and then remove back up lamp.
5. Remove seal packing from back up lamp.
INSTALLATION
Installation is the reverse order of removal.
Install a new seal packing to the back up lamp.
CAUTION: Seal packing cannot be reused.